Tools

[ Index main ] [ Search ] [ Tools Tips ]

CRC2 NEW PARTS CATALOG

TOOLS

	Impact Driver
Works excellent for removing stubborn Phillips head screws. An absolute must for the early bike mechanic. Comes with 4 different bits and works with 3/8" drive sockets too. Very good quality unit.
*14.95*

Terminals and Crimper Kit

This is a nice terminal kit with crimper that is designed specifically for the Japanese motorcycle. Kit comes with a nice selection of the various OEM type connectors and plugs found in out electrical terminal section of our catalog. The real beauty of this kit is the excellent set of crimpers you can use to correctly crimp the terminals to wire. Most crimpers do not come properly equipped to do the job like these. Every motorcycle mechanic from novis to expert should have this kit.

119.95

	*Battery Tender* *This tool will pay for itself the first winter you use it. Imagine NOT buying a new battery next year!*
Comes with a permanent mount pigtail and alligator clamps for easy use.
*29.95*

	*8 Inch Economy Tire Tool*
*4.95 each*


This versatile stand is easily adjustable to accommodate the wide range of engine types in service today. Height and width are both adjustable on the MC25, another major feature is the ability to rotate an engine a full 360 degrees. Pan removal, transmissions, starters, and clutches are just a few of the services that will be made easier with the MC25.
*MC25 Engine Stand*	*179.95* *Part is sent from manufacturer UPS Ground*


Analog type synchronizing tool. Has all parts needed to synk your carbs. Metal support back, calibration adjustable gauges. Comes with dampeners, hoses, 5mm threaded mounting tubes, and instructions.
*89.95*

	Under Seat tool kit.
Works with most bikes. Worth it's weight in GOLD when you get caught out on the road. If you have a 18mm spark plug hex you will need to add a plug wrench from below.
*17.95*

	Long Plug Wrench
*Plug Wrench for 18mm plugs (NGK "D" and "J" type) and (Nippondenso "X")*
4.95

	Motorcycle Jumper Cables
Small Jumper cables (appr 6' long) made just for bikes.
*8.95*

	Carb Cleaning Tool
This tool has many different sized spikes with ribs to clean out jets and holes in your carbs. This is a VERY handy tool for carbs that have pressed in jets or very small jet holes.
*9.95*